- Vessels are dual jacketed. Inner vessel fabricated from 5 mm thick stainless steel sheet. Outer jacket fabricated from heavy steel sheet with Water inlet and outlets provided.
- Aluminum cast / fabricated lid and discharge valve will be pneumatic operated.
- Blades made from stainless steel and treated for hard face coating on the mixing edges for long lasting. Stainless steel baffles plate with facility to change the angle, for different compounds. Thermocouple provided in the bottom of baffles so that it remains in contact of material under mixing.
- It will show the real temperature of mixing batch.
- Teflon ring provided in the bottom of vessel, Oil seal housing with oil seal below the vessel providing for perfect sealing and avoid material leakage into bearings.
- Additional gland (rope type) sealing also provided in addition to above seals for special application mixers for pigments and MASTERBATCH MAKING PURPOSE.
- Specially designed heavy duty C.I.“ Bearing and vessel housing” gives equilibrium during mixing.
- Specially designed cone type pulley will be provided on mixer vessel shaft to minimize cantilever loading on the shaft.
- Control Panel having mixer motor control, Ampere meter, Temperature controller, hooter/ indicator and main switch.
- Option for Mixer with single speed motor and AC Variable speed drive is beneficial for electrical installation and equipments. It controls/ regulates starting heavy inrush current (6-7 times of full load current) of the motor. Resulting into increase in motor winding, bearings & vee belts life and reduce maintenance & electrical consumption.
| MODELS | HCM-Lab | HCM-1340 | HCM-2150 | HCM- 2550 | HCM- 3060 | HCM- 4275 | HCM- 4580 | HCM- 50150 |
| Batch capacity | 05 Kg | 40 Kg | 60 Kg | 80 Kg | 100 Kg | 120 Kg | 150 Kg | 200 Kg |
| Mixer Motor – Dual Speed or Single Speed HP# | 4/5 Dual speed or 3 HP |
20/40 Dual speed or 20 HP |
31/40 Dual speed or 40 HP |
43/51 Dual speed or 50 HP |
50/60 Dual speed or 60 HP |
75 .0 HP | 90 .0 HP | 134 .0 HP |
| Cooler Mixer Motor | 1.0 HP | 5.0 HP | 5.0 HP | 7.5 HP | 7.5 HP | 10.0 HP | 10.0 HP | 15.0 HP |
| Mixing tool RPM Dual speed /Single Speed | 500/1000 or 750 |
500/1000 or 750 |
500/1000 or 750 |
430/860 or 750 |
430/860 or 750 |
100 to 750 variable |
100 to 750 variable |
100 to 750 variable |
| Mixer motor control Dual speed/ Star Delta/AC Vari drive |
Dual Speed/ Star Delta/ AC Vari Drive | Dual Speed/ Star Delta/ AC Vari Drive | Dual Speed/ Star Delta/ AC Vari Drive | Dual Speed/ Star Delta/ AC Vari Drive | Dual Speed/ Star Delta/ AC Vari Drive | Variable Speed Drive | Variable Speed Drive | Variable Speed Drive |
| Cooling Water Requirement | 70 Lts. / Hr. |
300 Lts. / Hr. |
400 Lts. / Hr. |
550 Lts. / Hr. |
600 Lts. / Hr. |
700 Lts. / Hr. |
800 Lts. / Hr. |
1200 Lts. / Hr. |
| Total Electrical Load | 3.75 KW | 22 .0 KW | 34. 0 KW | 44.0 KW | 51.0 KW | 63.5 KW | 74.5 KW | 112.0 KW |
| Floor Space Requirement | 1.0 X 0.8 Mt | 3.5 X 4.0 Mt | 3.7 X 4.2 Mt | 4.0 X 4.2 Mt | 4.2 X 4.5 Mt | 4.5 X 5.0 Mt | 4.5 X 5.0 Mt | 5.0 X 6.0 Mt |
| # Mixer Motor Capacity may change according to application. It will be as per our quotation. | ||||||||
NOTE: Motor capacities mentioned in above table are for making RPVC/ UPVC compound. Motor capacity will be higher than mentioned for making plasticized/ soft PVC compounds. Mixers for special applications are also available.